The Tankleenor will remove contaminants like gel precipitates, microbial growth, rust and water without disturbing the product or taking the tank out of service.

This lightweight, wheel-mounted pumping unit is designed for one-man operation and is easily moved from job to job.

The Tankleenor unit consists of a self-priming centrifugal O Series Pump with explosion-proof motor, reel assembly, hose assembly, connector hose, suction and discharge hose, guide tube and ground wire. Optional 50 Hz motor available.

The pump is equipped with a venturi-type eductor permitting recirculation of operating fluid without contaminating the tank, and a hand-operated valve for backflushing. The discharge and suction ports are fitted with male quick-connect couplers.

Reel Assembly
Detachable reel assembly for storing hose and controlling direction and travel rate. The reel assembly is fitted with a built-in sight tube which enables the operator to locate pockets of contamination and observe them until they’ve been cleaned up.

Hose Assembly
Hydrocarbon-resistant hose, 5/8 inch (16 mm) diameter by 42 feet (13 m) long, with a spring steel integral strap insert and a specially designed nozzle.

Connector Hose
6 feet by 3/4-inch (2 m x 19 mm), to connect pump eductor and valve to reel assembly.

Suction and Discharge Hoses
In 15 foot (4.6 m) lengths, fitted with quick-connect couplers to match pump suction and discharge couplers.

Stainless Steel Adjustable Guide Tube
13-1/2 feet (4.1 m) long, with spring-loaded foot.

Ground Wire
10 feet (3 m) long, with clip, for grounding pump.

Optional 50 Hz Motor
For 50 Hz operation, Unit 608 Tankleenor is available with 1-1/2 horsepower, class 1, group D, explosion-proof, 50 Hz, 115/220 V, single phase electric motor.

Tankleenor® is a registered trademark of The Gorman Rupp Company.